 |
Note: ES-IS is supported only on J Series routers. For information about how to configure ES-IS, see the J Series Services Router Basic LAN and WAN Access Configuration Guide or the JUNOS Routing Protocols Configuration Guide. |
Table 16 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot the End System-to-Intermediate System (ES-IS) protocol. Commands are listed in alphabetical order.
Table 16: ES-IS Operational Mode Commands
Task |
Command |
|---|---|
Clear ES-IS adjacencies. |
|
Clear ES-IS statistics for packets sent or received. |
|
Display ES-IS adjacencies. |
|
Display ES-IS interfaces. |
|
Display ES-IS statistics for packets sent or received. |
|
Note: ES-IS is supported only on J Series routers. For information about how to configure ES-IS, see the J Series Services Router Basic LAN and WAN Access Configuration Guide or the JUNOS Routing Protocols Configuration Guide. |
