A
- add/drop multiplexer See ADM
- address entries 1
- Address Resolution Protocol See ARP
- address statement 1
- ADM 1
- AIS alarms
- T1 interfaces 1
- T3 interfaces 1
- AIS-P alarms
- figure 1
- alarms
- AIS, locating 1
- AIS-L, locating 1
- AIS-P, locating 1
- ATM interfaces, checklist 1
- Channelized DS3 interfaces, checklist 1
- Channelized OC12 interfaces, checklist 1
- Channelized OC12 IQ interfaces, checklist 1
- Fast Ethernet interfaces, checklist 1
- Gigabit Ethernet interfaces, checklist 1
- LINK, displaying 1
- LOS, locating 1
- Multichannel DS3 interfaces, checklist 1
- SONET interfaces, checklist 1
- SONET network, figure 1, 2
- T1 interfaces, checklist 1
- T3 interfaces, checklist 1
- yellow, locating 1
- ARP configuration steps 1
- ATM cells 1
- ATM interfaces 1
- active alarms and defects, table 1
- alarms and errors
- checklist 1
- See SONET interfaces, alarms and errors 1
- circuit problems 1
- clear interfaces statistics command 1
- clocking, setting 1
- configuring local 1
- edit interfaces command 1
- edit interfaces sonet-options command 1, 2
- edit interfaces t3-options command 1, 2
- error statistics 1
- extensive status 1
- input and output errors, table 1
- loopback
- creating physical 1
- monitor checklist 1
- overview 1
- physical link
- down, table 1
- status 1
- ping interface command 1
- set clocking internal command 1
- set loopback local command 1
- set loopback remote command 1
- show chassis hardware command 1
- show interfaces command 1
- show interfaces extensive command 1, 2
- show interfaces terse command 1
- statistics
- checking errors 1
- resetting 1
- status
- description, table 1
- extensive 1
- verifying 1
- transmit clock 1
- type, determining 1
- ATM1 interfaces 1
- configuration, checking 1
- errors 1, 2
- monitor checklist 1
- monitor interface command 1
- physical link down 1
- pic-type statement 1
- set cli terminal command 1
- show chassis hardware command 1
- show configuration interfaces command 1
- show interfaces command 1
- show interfaces extensive command 1
- statistics, monitoring 1
- status
- displaying for specific 1
- extensive 1
- ATM2 IQ interfaces 1
- configuration checking 1
- errors 1
- maximum-vcs statement 1
- monitor checklist 1
- monitor interface command 1
- overview 1
- physical link up 1
- promiscuous mode 1
- set cli terminal command 1
- show chassis hardware command 1
- show configuration interfaces command 1
- show interfaces command 1
- show interfaces extensive command 1
- show interfaces terse command 1
- status
- displaying for specific 1
- extensive 1
- autonegotiation, table 1, 2
C
- cables
- damaged or dirty 1, 2, 3
- mismatch 1, 2, 3
- multimode fiber 1
- single-mode fiber 1, 2, 3
- CCC, protocol family 1
- cell-payload scrambling 1
- channel, Channelized OC12 IQ interfaces 1
- channelization levels, controller interface 1
- Channelized DS3 interfaces
- alarms and errors 1
- circuit problem 1
- clear interfaces statistics command 1
- edit interfaces command 1, 2
- edit interfaces t1-options command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback, configuring
- from specific T1 interface 1
- monitor interface command 1
- monitor, checklist 1
- no keepalives, configuring 1
- notification messages 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1, 2
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show interfaces command 1, 2, 3, 4
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1, 2
- displaying specific 1, 2
- extensive 1
- logical interface, verifying 1
- t1-options statement 1, 2
- t3-options statement 1
- channelized DS3 to DS0 interfaces
- alarms and errors 1
- clear interfaces statistics command 1
- logical interface 1
- monitor interfaces command 1
- ping interface command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- channelized DS3 to DS1 interfaces
- alarms and errors 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- channelized interfaces 1
- Channelized DS3, status, displaying 1
- errors 1, 2, 3
- Multichannel DS3, status, displaying 1
- naming
- DS3 to DS0 1
- DS3 to DS1 1
- notification messages 1
- OC12 IQ status, displaying 1
- OC12 status, displaying 1
- overview 1
- physical link down 1
- statistics monitoring 1
- status 1, 2, 3
- extensive 1, 2, 3
- Channelized OC12 interfaces
- alarms 1
- alarms and errors 1, 2
- checklist for alarms 1
- circuit problem 1
- clear interfaces statistics command 1
- defects 1
- edit interfaces command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1, 2
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback, configuring
- for entire T3 interface 1
- monitor
- checklist 1
- statistics 1
- monitor interface command 1
- no keepalives, configuring 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1, 2, 3
- set cli terminal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show command 1
- show interfaces coc1 command 1
- show interfaces coc12 command 1
- show interfaces command 1, 2
- show interfaces ct1 command 1
- show interfaces ct3 command 1
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1
- displaying for specific 1
- extensive 1
- logical interface, verifying 1
- t3-options statement 1, 2, 3
- Channelized OC12 IQ interfaces
- alarms and errors 1, 2
- checklist for alarms 1
- circuit problem 1
- configuration 1
- figure 1
- controller interface 1
- channelization levels 1
- status, displaying 1, 2
- edit interfaces command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1
- hierarchy 1
- individual channels down 1
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback, configuring
- for entire T3 interface 1
- monitor checklist 1
- no keepalives, configuring 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1, 2, 3
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show command 1
- show interfaces command 1, 2, 3
- show interfaces controller command 1
- show interfaces extensive 1
- show interfaces extensive command 1
- show interfaces terse coc command 1
- show interfaces terse command 1
- specific
- channel, displaying status 1
- figure 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1
- displaying for specific 1
- extensive 1
- logical interface, verifying 1
- t3-options statement 1
- checklist for alarms
- ATM interfaces 1
- Channelized DS3 alarms 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 alarms 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- checklist for monitoring
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- checklist for payload scrambling, SONET 1
- checklist for SONET frame checksum 1
- checksum, SONET frame 1
- circuit cross-connect CCC, protocol family See CCC, protocol family
- circuit problems
- ATM interfaces 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Cisco-HDLC, configuring encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- clear interfaces statistics command
- ATM interfaces 1
- Channelized DS3 interfaces 1
- channelized DS3 to DS0 interfaces 1
- Channelized OC12 interfaces 1
- Fast Ethernet interfaces 1
- Fast Ethernet statistics 1
- SONET interfaces 1, 2
- T1 interfaces 1
- T3 interfaces 1
- clock
- location of onboard, table 1
- clock sources
- figure 1
- clocking 1
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- clocking statement, usage guidelines 1
- commands for router management, interfaces 1, 2
- configuration, interfaces
- ATM interfaces, incorrect 1
- Channelized OC12 IQ 1
- checking
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- connections, verifying 1
- connectors, network, and interface names 1
- controller interface
- Channelized OC12 IQ interfaces 1, 2
- levels of channelization, figure 1
- show interfaces command 1
- counters 1
- craft interface, LED alarms 1
- cumulative statistics
- Ethernet interfaces 1
- SONET interfaces 1
- customer support 1
- contacting JTAC 1
D
- data integrity 1
- delete fcs 32 command 1
- descriptors, configuring 1
- documentation
- comments on 1
- downstream, SONET alarms and errors, defining 1
- DS0 interface 1
E
- edit interfaces command 1, 2
- ATM interfaces 1
- Channelized DS3 interfaces 1, 2
- Channelized OC12 interfaces 1, 2
- Channelized OC12 IQ interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1, 2
- SONET interfaces 1, 2, 3, 4
- T1 interfaces 1, 2, 3
- T3 interfaces 1, 2, 3
- edit interfaces fastether-options command 1
- edit interfaces gigether-options command 1
- edit interfaces sonet-options command
- ATM interfaces 1, 2
- SONET interfaces 1, 2, 3
- edit interfaces t1-options command
- Channelized DS3 interfaces 1, 2
- Multichannel DS3 interfaces 1, 2
- T1 interfaces 1, 2
- edit interfaces t3-options command
- ATM interfaces 1, 2
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1, 2
- Channelized OC12 IQ interfaces 1, 2
- Multichannel DS3 interfaces 1, 2
- T3 interfaces 1, 2
- encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- error statistics
- ATM interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1, 2
- OC3 ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 ATM interfaces 1
- T3 interfaces 1
- errors
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Ethernet interfaces 1
- Fast Ethernet interfaces, table 1
- Gigabit Ethernet interfaces, table 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1, 2
- Ethernet interfaces
- autonegotiation, table 1, 2
- RJ-45 1
- specifications, table 1
F
- family
- descriptors 1
- statement 1
- Fast Ethernet interfaces
- alarms, LINK 1
- autonegotiation, table 1
- circuit problems 1, 2
- clear interfaces statistics command 1
- counters 1, 2
- edit interfaces command 1
- LINK alarms, checklist 1
- local loopback, configuring 1
- monitor checklist 1
- monitor interface command 1, 2
- monitoring 1
- overview 1
- physical loopback 1
- ping interface command 1
- set arp command 1
- set cli terminal command 1
- set loopback local command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1
- static ARP entry, configuring 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- errors, table 1
- verifying 1
- fiber-optic
- connection 1
- Ethernet interface specifications, table 1
- interface, physical loopback 1
- Flexible PIC Concentrator FPC See FPC
- Forwarding Module SFM See SFM
- FPC 1
- frame checksum, SONET interfaces 1
- frame error control, SONET interfaces overview 1
- frames, SONET 1
- framing errors
- SONET interfaces 1
- T3 interfaces 1
G
- Gigabit Ethernet interfaces
- alarms, LINK 1
- autonegotiation, table 1
- circuit problems 1
- counters 1, 2
- edit interfaces command 1
- LINK alarms, checklist 1
- local loopback, configuring 1
- loopback plug, creating 1
- monitor checklist 1
- monitor interface command 1, 2
- monitoring 1
- overview 1
- physical loopback, creating 1
- ping interface command 1
- set arp command 1
- set cli terminal command 1
- set loopback local command 1
- show interfaces command 1, 2
- show interfaces extensive command 1, 2
- show interfaces terse command 1, 2
- static ARP entry, configuring 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- displaying specific 1
- errors, table 1
- extensive 1
- verifying 1
- GR-253 CORE 1
H
- HDLC
- configuring encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- payload scrambling
- SONET interfaces, checking 1
- hierarchy
- Channelized OC12 IQ interfaces 1
- SONET 1
I
- IDLE signal, T3 interfaces 1
- input keepalives, SONET interfaces 1
- interface names
- examples 1
- logical part 1
- physical part 1
- separators 1
- interfaces
- alarms 1
- descriptors 1
- displaying order in configurations 1
- investigation process 1, 2
- locating alarms 1
- loopback test commands, table 1
- monitoring commands, table 1
- monitoring, general steps 1
- names and naming 1, 2
- slot, PIC, and port locations 1
- supported by JUNOS software, table 1
- interfaces statement 1
- International Organization for Standardization, protocol family See ISO, protocol family
- Internet Protocol, version 4 See IPv4
- Internet Protocol, version 6 See IPv6
- investigation process 1
- interfaces 1, 2
- IPv4 1
- IPv6 1
- ISO, protocol family 1
J
- JUNOS software, supported interfaces, table 1
K
- keepalives, disabling 1
L
- line overhead bytes 1, 2
- line-terminating equipment See LTE
- lines, SONET 1
- link layer, forcing up
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- link stability 1
- LOF alarms
- T3 interfaces
- alarms and errors 1
- logical interfaces
- descriptors 1
- SONET interfaces, status 1, 2
- T3 interfaces, status 1
- logical part, interface name 1
- loopback test, checklists
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loopback, configuring local 1
- ATM interfaces 1
- ATM interfaces, figure 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- T1 interfaces 1, 2
- T3 interfaces 1
- loopback, creating physical
- ATM interfaces 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loopback, plug 1
- LOS alarms
- SONET interfaces 1
- T3 interfaces 1
- LTE 1
M
- manuals
- comments on 1
- maximum-vcs statement 1
- ATM2 IQ interfaces 1
- MCS 1
- Miscellaneous Control Subsystem See MCS
- monitor interface command
- ATM1 interface 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- channelized DS3 to DS0 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Multichannel DS3 interfaces
- alarms and errors 1, 2
- checklist for alarms 1
- clear interface statistics command 1
- edit interfaces command 1, 2
- edit interfaces t1-options command 1, 2
- edit interfaces t3-options command 1, 2
- encapsulation, configuring 1
- errors 1
- link layer, forcing up 1
- local loopback, configuring 1
- loopback, configuring
- for entire T3 interface 1
- from specific T1 interface 1
- monitor
- channelized 1
- checklist 1
- monitor interfaces command 1
- no keepalives, configuring 1
- physical link status 1, 2, 3
- physical loopback, creating 1
- ping interface command 1
- problems, table 1
- set cli terminal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1, 2
- set no-keepalives command 1
- show command 1
- show interfaces command 1, 2
- show interfaces extensive command 1, 2
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1, 2
- displaying specific 1
- extensive 1
- logical interface, verifying 1
- t1-options statement 1, 2
- t3-options statement 1, 2
- Multilink Frame Relay See MLFR
- Multilink PPP See MLPPP
- multimode fiber cable 1
- Multiprotocol Label Switching See MPLS
N
- naming
- channelized interfaces 1
- interfaces 1, 2
- network 1, 2, 3, 4, 5, 6, 7
- network connectors, and interface names 1
- no-keepalives, configuring
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- notification messages, logging for 1, 2
O
- OC1 interface 1
- OC3 ATM interface
- extensive output 1
- status 1
- OC3 SONET interface 1
- onboard clock 1
- optical attenuation 1, 2, 3
- output keepalives, SONET interfaces 1
P
- path area, SONET interfaces 1
- path overhead bytes 1, 2
- path-terminating equipment See PTE
- payload
- scrambling
- checking 1
- configuring 1
- SONET interfaces 1
- status 1, 2
- SONET interfaces 1, 2
- physical interfaces, descriptors 1
- physical link down
- ATM interfaces, table 1
- ATM1 interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1, 2
- Fast Ethernet interfaces, table 1
- Gigabit Ethernet interfaces, table 1
- Multichannel DS3 interfaces, table 1
- SONET interfaces 1, 2
- table 1
- T1 interfaces 1
- table 1
- T3 interfaces 1
- table 1
- physical link up
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1, 2
- physical loopback
- ATM interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- physical part, interface name 1
- pic-type statement
- ATM1 interfaces 1
- ping interface command
- ATM interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1, 2
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- problems
- ATM interfaces, table 1
- channelized interfaces, table 1
- T1 interfaces, table 1, 2
- promiscuous mode, ATM2 IQ interfaces 1
- properties, for physical interfaces 1
- protocol families, supported 1
- PTE 1
R
- red alarm bell 1
- repeaters 1
- RJ-45 Ethernet interface 1
- routers, path-terminating equipment 1
S
- SBR 1
- SCB 1
- SCG 1
- scrambling, SONET payload 1
- section overhead
- bytes 1, 2
- section-terminating equipment See STE
- separators, in interface names 1
- set arp command
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- set cli terminal command
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized OC12 interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set clocking internal command
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set encapsulation command
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1, 2
- T3 interfaces 1
- set fcs 16 command 1
- set fcs 32 command 1
- set loopback local command
- ATM interfaces 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set loopback remote command
- ATM interfaces 1
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Multichannel DS3 interfaces 1, 2
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set no-keepalives command
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Multichannel DS3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set payload-scrambler command 1, 2, 3
- set rfc-2615 command 1, 2
- SFM 1
- show chassis hardware command 1
- show command 1, 2, 3
- show configuration command 1
- show configuration interfaces command
- ATM1 interfaces 1, 2
- ATM2 IQ interfaces 1, 2, 3, 4
- SONET interfaces 1
- show interfaces coc1 command 1
- show interfaces coc12 command 1
- show interfaces command 1, 2, 3
- ATM interfaces 1
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1, 2, 3, 4
- channelized DS3 to DS0 interfaces 1, 2, 3
- Channelized OC12 interfaces 1, 2, 3
- Channelized OC12 IQ interfaces 1, 2, 3, 4
- controller interface 1
- DS3 to DS1interfaces 1, 2
- Fast Ethernet interfaces 1, 2, 3
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1, 2, 3, 4
- T1 interfaces 1, 2, 3
- T3 interfaces 1, 2
- show interfaces controller command 1
- show interfaces ct1 command 1
- show interfaces ct3 command 1
- show interfaces extensive command 1, 2
- ATM interfaces 1, 2
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1, 2, 3
- channelized DS3 to DS0 interfaces 1, 2
- channelized DS3 to DS1 interfaces 1
- Channelized OC12 interfaces 1, 2, 3
- Channelized OC12 IQ interfaces 1, 2
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1
- SONET interfaces 1, 2, 3, 4
- T1 interfaces 1, 2
- T3 interfaces 1, 2
- show interfaces terse coc command 1
- show interfaces terse command
- ATM interfaces 1
- ATM1 interfaces 1
- ATM2 IQ interfaces 1, 2
- Channelized DS3 interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1, 2
- T1 interfaces 1, 2
- T3 interfaces 1, 2
- signal transmission 1
- Single Board Router See SBR
- single-mode fiber cable 1, 2, 3
- SONET clock generatorSys See SCG
- SONET frames 1
- line overhead bytes 1
- path overhead bytes 1
- section overhead bytes 1
- SONET interfaces 1
- alarms and errors
- AIS-P alarms 1
- displaying 1
- LOS alarms 1
- path signal label assignments, table 1
- PLM-P alarms 1
- RDI-L alarms 1
- RDI-P alarms 1
- REI-L alarms 1
- REI-P alarms 1
- alarms and errors checklist 1
- circuit problems 1
- clear interfaces statistics command 1
- clocking
- setting 1
- delete fcs 32 command 1
- displaying for specific 1
- edit interfaces command 1, 2, 3, 4
- edit interfaces sonet-options command 1, 2, 3
- encapsulation, configuring 1
- error statistics 1
- frame 1
- checksum checklist 1
- error control 1
- further investigation 1
- HDLC payload scrambling 1
- line area 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- configuring local 1
- creating physical 1
- monitor checklist 1
- no keepalives
- configuring 1
- setting 1
- overview 1
- path area 1, 2
- payload scrambling
- checklist 1
- configuring 1
- conflicts 1
- described 1
- levels 1
- status 1, 2
- physical link down, table 1
- ping interface command 1
- section area 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1
- set fcs 16 command 1
- set fcs 32 command 1
- set loopback local command 1
- set loopback remote command 1
- set no keepalives command 1
- set payload-scrambler command 1
- show configuration interfaces command 1
- show interfaces command 1, 2, 3, 4, 5
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1, 2
- statistics
- checking errors 1
- monitoring 1
- resetting 1
- status
- description table 1
- displaying 1
- extensive 1
- verifying 1
- transmit clock 1
- transmitted path trace, checking 1
- SONET network 1
- line area 1
- network, figure 1
- section area 1
- span 1
- system hierarchy 1
- sonet-options statement 1, 2, 3, 4, 5, 6
- span and SONET line 1
- span, and SONET line 1
- specifications for fiber-optic, table 1
- SSB 1
- static address resolution protocol 1
- statistic error
- Fast Ethernet interfaces 1
- statistics
- ATM interfaces, resetting 1
- ATM1 interfaces 1
- channelized interfaces 1, 2
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- cumulative for SONET interfaces 1
- errors
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Fast Ethernet interfaces 1
- resetting 1
- Gigabit Ethernet interfaces 1
- resetting 1
- SONET interfaces, resetting 1
- T1 interfaces
- checking 1
- monitoring 1
- resetting 1
- T3 interfaces
- checking 1
- monitoring 1
- resetting 1
- status
- ATM interfaces 1
- Channelized DS3 interfaces 1, 2
- channelized interfaces 1, 2
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- controller interface 1
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1, 2
- Multichannel DS3 interfaces 1
- SONET interfaces 1, 2
- T1 interfaces 1, 2
- T3 interfaces 1
- status description, table
- ATM interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- status extensive
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS3 interfaces 1
- channelized interfaces 1
- Channelized OC12 interfaces 1
- Channelized OC12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- status for specific interface
- ATM 1
- Channelized OC12 1
- Channelized OC12 IQ 1
- Fast Ethernet 1
- Gigabit Ethernet 1
- SONET 1
- T1 1
- T3 1
- STE 1
- steps and commands, overview 1
- STS
- path signal label assignments, figure 1
- path signal label assignments, table 1
- support, technical See technical support
- supported processes 1
- System and Switch Board See SSB
- system board, location of, table 1
- System Control Board See SCB
- system hierarchy, SONET interfaces 1
T
- T1 interfaces
- alarms and errors
- AIS alarms 1
- definitions, table 1
- displaying 1
- yellow alarms 1
- circuit problems 1
- clear statistics command 1, 2, 3, 4, 5, 6
- configuring local 1
- edit interfaces command 1, 2, 3
- edit interfaces t1-options command 1, 2
- encapsulation, configuring 1
- error statistics 1
- further investigation 1, 2
- HDLC, configuring encapsulation 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- creating physical 1
- loopback, creating physical 1
- monitor checklist 1, 2
- no keepalives, configuring 1
- overview 1
- ping command 1
- ping interface command 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1, 2
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1, 2
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying all 1
- displaying specific 1
- extensive 1
- supported standards 1
- transmit clocks 1
- T1 media alarms, table 1, 2
- t1-options statement 1, 2, 3, 4
- T3 ATM interfaces
- extensive output 1
- physical link down 1
- physical link up 1
- T3 interfaces
- alarms and errors
- AIS alarms 1
- checklist 1
- displaying 1
- IDLE signals 1
- LOS alarms 1
- yellow alarms 1
- circuit problems 1
- clocking, setting 1
- edit interfaces command 1, 2, 3
- edit interfaces t3-options command 1, 2
- encapsulation, configuring 1
- error statistics 1
- further investigation 1
- HDLC, configuring encapsulation 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- configuring local 1
- creating physical 1
- monitor checklist 1
- monitor interface command 1
- no keepalives, configuring 1
- overview 1
- physical link status 1
- ping interface command 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1, 2
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- displaying all 1
- displaying specific 1
- extensive 1
- verifying 1
- supported standards 1
- transmit clocks 1
- t3-options statement 1, 2, 3, 4, 5, 6, 7, 8, 9
- TCC, protocol family 1
- technical support
- contacting JTAC 1
- telcordia/bellcore standard GR-253 CORE 1
- TNP, protocol family 1
- translational cross-connect TCC, protocol family See TCC, protocol family
- transmit light level 1
- Trivial Network Protocol, protocol family See TNP, protocol family
- tunnel statement 1
U
- unit statement 1
- upstream or downstream failure, figure 1, 2
- upstream, SONET alarms and errors, defining 1
V
- VCI, configuration
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- virtual channel identifier VCI, configuration See VCI, configuration
- virtual channel identifier, configuration See VCI, configuration
Y
- yellow alarm bell 1
- yellow alarms
- T1 interfaces 1
- T3 interfaces 1