List of Tables

Table 1: Notice Icons

Table 2: Text and Syntax Conventions

Table 3: Major Router Hardware Components

Table 4: Methods for Configuring JUNOS Software

Table 5: Special Requirements for Plain-Text Passwords

Table 6: Default System Login Classes

Table 7: Login Class Permission Flags

Table 8: Common Regular Expression Operators to Allow or Deny Operational Mode Commands

Table 9: Configuration Mode Commands—Common Regular Expression Operators

Table 10: Juniper Networks Vendor-Specific RADIUS Attributes

Table 11: Juniper Networks Vendor-Specific TACACS+ Attributes

Table 12: Order of Authentication Attempts

Table 13: Minimum Configuration Statements for System Logging

Table 14: Default System Logging Settings

Table 15: JUNOS System Logging Facilities

Table 16: System Log Message Severity Levels

Table 17: Default Facilities for Messages Directed to a Remote Destination

Table 18: Facilities for the facility-override Statement

Table 19: Facility Codes Reported in Priority Information

Table 20: Numerical Codes for Severity Levels Reported in Priority Information

Table 21: Regular Expression Operators for the match Statement

Table 22: Regular Expression Operators for the match Statement

Table 23: Example: Local and Forwarded Severity Level Are Both info

Table 24: Example: Local Severity Is notice, Forwarded Severity Is critical

Table 25: Example: Local Severity Is critical, Forwarded Severity Is notice

Table 26: Example: Local and Forwarded Severity Level Are Both info

Table 27: Example: Local Severity Is notice, Forwarded Severity Is critical

Table 28: Example: Local Severity Is critical, Forwarded Severity Is notice

Table 29: Pool and Binding Statements

Table 30: Common Configuration Statements

Table 31: DHCP Processes Tracing Flags

Table 32: System Alarms on J Series Routers

Table 33: Juniper Networks Vendor-Specific RADIUS Attributes for L2TP

Table 34: Supported IETF RADIUS Attributes for L2TP

Table 35: Supported RADIUS Accounting Start Attributes for L2TP

Table 36: Supported RADIUS Accounting Stop Attributes for L2TP

Table 37: Attributes That Can Be Ignored in RADIUS Accept-Accept Messages

Table 38: Attributes That Can Be Excluded from RADIUS Messages

Table 39: Supported RADIUS IETF Attributes

Table 40: Supported Juniper Networks VSAs

Table 41: DHCP Attributes

Table 42: DHCPv6 Attributes

Table 43: Configurable PIC Alarm Conditions

Table 44: Chassis Component Alarm Conditions on M5 and M10 Routers

Table 45: Chassis Component Alarm Conditions on M7i and M10i Routers

Table 46: Chassis Component Alarm Conditions on M20 Routers

Table 47: Chassis Component Alarm Conditions on M40 Routers

Table 48: Chassis Component Alarm Conditions on M40e and M160 Routers

Table 49: Chassis Component Alarm Conditions on M120 Routers

Table 50: Chassis Component Alarm Conditions on M320 Routers

Table 51: Chassis Component Alarm Conditions on MX Series Ethernet Services Routers

Table 52: Backup Routing Engine Alarms

Table 53: Ranges for Channelized DS3-to-DS0 Configuration

Table 54: Ranges for Channelized E1 Configuration

Table 55: Maximum Delay Buffer with q-pic-large-buffer Statement Enabled

Table 56: Restricted Software Features in Ethernet Services Mode

Table 57: T640 to Routing Matrix FPC Conversion Chart

Table 58: T1600 Router to Routing Matrix FPC Conversion Chart