Juniper Networks
Log in
|
How to Buy
|
Contact Us
|
United States (Change)
Choose Country
Close

Choose Country

North America

  • United States

Europe

  • Deutschland - Germany
  • España - Spain
  • France
  • Italia - Italy
  • Россия - Russia
  • United Kingdom

Asia Pacific

  • Asean Region (Vietnam, Indonesia, Singapore, Malaysia)
  • Australia
  • 中国 - China
  • India
  • 日本 - Japan
  • 대한민국 - Korea
  • 台灣 - Taiwan
Solutions
Products & Services
Company
Partners
Support
Education
Community
Security Intelligence Center

Technical Documentation

Support
Technical Documentation
Content Explorer New
 
Enterprise MIBs
 
EOL Documentation
 
File Format Help
 
Glossary
 
Portable Libraries
 
 
Home > Support > Technical Documentation > JCS 1200 Platform > JCS 1200 Software > Displaying Shared Interface Information
Print
Rate and give feedback:  Feedback Received. Thank You!
Rate and give feedback: 
Close
This document helped resolve my issue.  Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  
E-mail: 
Submitting...
 

Related Documentation

  • JCS 1200
  • Configuring Shared Interfaces on the RSD
  • Configuring Shared Interfaces on a PSD
 

Displaying Shared Interface Information

Purpose

Display information about shared interfaces.

Action

Using the show interfaces so-fpc/pic/slot or show interfaces ge-fpc/pic/slot command, display logical interfaces configured on a shared physical interface.

The following fields in the output from the command display information about shared interfaces:

  • Shared-interface—Located under the Physical interface: section of the output, this field indicates whether the routing domain is the owner or non-owner of the shared interface. If the routing domain is the RSD, the value is Owner. If the routing domain is a PSD under the RSD, the value is Non-owner.
  • Shared interface—Located under the Logical interface: section of the output, this section includes these fields:
    • shared with—(RSD only) Provides the identity of the PSD that owns the shared interface; for example, psd3.
    • peer interface—(PSD only) Lists the logical tunnel interface that peers with the logical interface; for example, ut-2/1/0.2.
    • tunnel token—Specifies the receive (RX) and transmit (TX) tunnel tokens. For example, Rx: 5.519, Tx: 13.514.

Note: When you issue this command on the PSD for SONET interfaces, the following information about the physical interface is not provided:

  • Media status
  • Frame Relay LMI counters
  • SONET mode

On the RSD (SONET Interface)

In the following sample output, rsd1 is the owner of the physical SONET interface so-7/2/0 and the logical SONET interface so-7/2/0.0 is shared by psd5.

user@rsd1> show interfaces so-7/2/0
Physical interface: so-7/2/0, Enabled, Physical link is Down
  Interface index: 128, SNMP ifIndex: 109
  Link-level type: Frame-Relay, MTU: 4474, Clocking: Internal, SONET mode,
  Speed: OC192, Loopback: None, FCS: 16, Payload scrambler: Enabled
  Device flags   : Present Running Down
  Interface flags: Hardware-Down Point-To-Point SNMP-Traps Internal: 0x4000
  Shared-interface  : Owner
  Link flags     : No-Keepalives DTE
  ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds
  LMI: Input: 0 (never), Output: 0 (never)
  DTE statistics:
    Enquiries sent                       : 0
    Full enquiries sent                  : 0
    Enquiry responses received           : 0
    Full enquiry responses received      : 0
  DCE statistics:
    Enquiries received                   : 0
    Full enquiries received              : 0
    Enquiry responses sent               : 0
    Full enquiry responses sent          : 0
  Common statistics:
    Unknown messages received            : 0
    Asynchronous updates received        : 0
    Out-of-sequence packets received     : 0
    Keepalive responses timedout         : 0
  CoS queues     : 8 supported, 8 maximum usable queues
  Last flapped   : 2008-08-11 10:51:51 PDT (1w1d 04:47 ago)
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  SONET alarms   : LOL, PLL
  SONET defects  : LOL, PLL, LOF, SEF, AIS-L, AIS-P

  Logical interface so-7/2/0.0 (Index 67) (SNMP ifIndex 117) 
    Flags: Device-Down Point-To-Point SNMP-Traps 0x4000 Encapsulation: FR-NLPID
    Shared interface:
      Shared with: psd5
      Tunnel token: Rx: 2.517, Tx: 1.517
    Input packets : 0 
    Output packets: 0
    DLCI 700
      Flags: Active
      Total down time: 00:01:09 sec, Last down: 284:58:21 ago
        Input packets : 0 
        Output packets: 0
  DLCI statistics:
    Active DLCI  :1  Inactive DLCI  :0

On the PSD (SONET Interface)

The following sample output shows that so-0/3/0 is not owned by the PSD. The logical SONET interface so-0/3/0.0 is configured on a shared physical interface and ut-1/0/0.0 is its peer tunnel interface.

user@psd1> show interfaces so-0/3/0
Physical interface: so-0/3/0, Enabled, Physical link is Up
  Interface index: 151, SNMP ifIndex: 19353
  Link-level type: Frame-Relay, MTU: 4474, Clocking: Internal, Speed: OC192,
  Loopback: None, FCS: 16, Payload scrambler: Enabled
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps Internal: 0x4000
  Shared-interface  : Non-Owner
  Link flags     : No-Keepalives DTE
  ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds
  CoS queues     : 8 supported, 8 maximum usable queues
  Last flapped   : Never
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)

  Logical interface so-0/3/0.0 (Index 68) (SNMP ifIndex 19352)
    Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: FR-NLPID
    Shared interface:
      Peer interface: ut-1/0/0.0
      Tunnel token: Rx: 2.518, Tx: 1.518
    Input packets : 9
    Output packets: 10
    Protocol inet, MTU: 4470
      Addresses, Flags: Is-Preferred Is-Primary
        Destination: 16.16.0.0/30, Local: 16.16.0.1, Broadcast: 16.16.0.3
    DLCI 16
      Flags: Active
      Total down time: 00:00:00 sec, Last down: 00:00:55 ago
        Input packets : 9
        Output packets: 10
  DLCI statistics:
    Active DLCI  :1  Inactive DLCI  :0

On the RSD (Gigabit Ethernet Interface)

In the following sample output, rsd1 is the owner of the physical Gigabit Ethernet interface so-7/2/0, and the logical Gigabit interface so-7/2/0.0 is shared by psd5.

user@rsd1> show interfaces ge-7/2/0
Physical interface: ge-7/2/0, Enabled, Physical link is Up
  Interface index: 143, SNMP ifIndex: 187
  Link-level type: Ethernet, MTU: 1518, Speed: 10Gbps, BPDU Error: None,
  MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
  Flow control: Enabled
  Device flags   : Present Running
  Interface flags: SNMP-Traps Internal: 0x4000
  Shared-interface : Owner
  CoS queues     : 8 supported, 8 maximum usable queues
  Current address: 00:17:cb:25:48:7e, Hardware address: 00:17:cb:25:48:7e
  Last flapped   : 2008-12-08 12:19:25 PST (01:17:11 ago)
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  Active alarms  : None
  Active defects : None

  Logical interface ge-7/2/0.0 (Index 69) (SNMP ifIndex 236) 
    Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.10 ]  Encapsulation: ENET2
    Shared-interface:
      Shared with: psd5
      Tunnel token: Rx: 1.520, Tx: 2.530
    Input packets : 0 
    Output packets: 0
    Protocol multiservice, MTU: Unlimited
      Flags: None

On the PSD (Gigabit Ethernet Interface)

The following sample output shows that ge-0/3/0 is not owned by the PSD. The logical SONET interface ge-0/3/0.0 is configured on a shared physical interface and ut-1/0/0.0 is its peer tunnel interface.

user@psd1> show interfaces ge-0/3/0
Physical interface: ge-0/3/0 Enabled, Physical link is Down
  Interface index: 172, SNMP ifIndex: 152
  Link-level type: Ethernet, MTU: 1518, Speed: 1000mbps, BPDU Error: None,
  MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
  Flow control: Enabled, Auto-negotiation: Enabled, Remote fault: Online
  Device flags   : Present Running
  Interface flags: Hardware-Down SNMP-Traps Internal: 0x4000
  Shared-interface : Non-Owner
  CoS queues     : 8 supported, 8 maximum usable queues
  Current address: 00:17:cb:25:48:40, Hardware address: 00:17:cb:25:48:40
  Last flapped   : Never
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  Active alarms  : None
  Active defects : None

  Logical interface ge-0/3/0.0 (Index 72) (SNMP ifIndex 1220) 
    Flags: Link-Layer-Down Device-Down SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.101 ] 
    Encapsulation: ENET2
    Shared-interface:
      Peer interface: ut-1/0/0.0
      Tunnel token: Rx: 14.538
    Input packets : 13 
    Output packets: 7774
    Output Filters: filter-safari
    Protocol inet, MTU: 1500
      Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
        Destination: 173.16.254.0/30, Local: 173.16.254.1, Broadcast: 173.16.254.3
    Protocol inet6, MTU: 1500
      Flags: None
      Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
        Destination: 1000::173:16:0:0/96, Local: 1000::173:16:254:1
      Addresses, Flags: Dest-route-down Is-Preferred
        Destination: fe80::/64, Local: fe80::217:cb00:6525:4840
    Protocol multiservice, MTU: Unlimited
      Flags: None

 

Related Documentation

  • JCS 1200
  • Configuring Shared Interfaces on the RSD
  • Configuring Shared Interfaces on a PSD
 

Published: 2012-03-08

 
  • About Juniper
  • The New Network
  • Investor Relations
  • Press Releases
  • Newsletters
  • Juniper Offices
  • Resources
  • How to Buy
  • Partner Locator
  • Image Library
  • Visio Templates
  • Security Center
  • Community
  • Forums
  • Blogs
  • Junos Central
  • Social Media
  • Support
  • Technical Documentation
  • Knowledge Base (KB)
  • Software Downloads
  • Product Licensing
  • Contact Support
Site Map / RSS Feeds / Careers / Accessibility / Feedback / Privacy & Policy / Legal Notices
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
Help
|
My Account
|
Log Out