Technical Documentation
Displaying Inter-PSD Forwarding Information
Purpose
Display information about inter-PSD forwarding.
Action
Using the show interfaces xt-fpc/pic/slot command, display logical interfaces configured on the cross-connect interface. In the following example, the interface type is Inter-PSD-tunnel and there is one logical interface (xt-5/0/0.1).
user@psd2> show interfaces xt-5/0/0 Physical interface: xt-5/0/0, Enabled, Physical link is Up
Interface index: 136, SNMP ifIndex: 644
Type: Inter-PSD-tunnel, Link-level type: Inter-PSD-tunnel, MTU: Unlimited,
Speed: 12800mbps
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link type : Full-Duplex
Link flags : None
Physical info : 13
Last flapped : 2009-01-30 18:24:07 PST (19:14:07 ago)
Input rate : 0 bps (0 pps)
Output rate : 67128 bps (116 pps)
Logical interface xt-5/0/0.1 (Index 71) (SNMP ifIndex 645)
Flags: Point-To-Point SNMP-Traps 0x4000 DLCI 1 Encapsulation: FR-NLPID
Input packets : 0
Output packets: 7841
Protocol inet, MTU: Unlimited
Addresses, Flags: Is-Preferred Is-Primary
Destination: 10.0.0.2, Local: 10.0.0.1 Published: 2012-03-08
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
