Configuring the System Name and Contact Information

1. Log in to the JCS management module.
2. Use the env command to set JCS management module 1 (mm[1]) as the configuration target. For example:
   system> env —T mm[1]
3. Use the config command to configure the system name, location, and contact information for the JCS. For example:
   system:mm[1]> config -name system5 -contact “George Chang email=chang@corp.net phone=x2368” —loc “Software Lab, Main Campus, Building 12”

   In this example, the system name is system5. This name identifies the JCS on the network, appears in monitoring command output, and so on. The contact information is for George Chang and the location is Software Lab.