Applying a Classifier to a Subscriber Interface in a Dynamic Profile

You can apply the classification map to a subscriber interface in a dynamic profile.

For dynamic CoS, you define the classification map for the CoS values statically, then reference the classifier configuration in the dynamic profile for the subscriber interface.

1. Define the classifier.

   The available classifier types for dynamic CoS are dscp, dscp-ipv6, ieee-802.1, and inet-precedence.

   See Defining Classifiers.

2. Apply the classifier definition to the subscriber interface in the dynamic profile.
   [edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number]user@host# edit classifiers
3. Configure the applicable classifiers in the dynamic profile.
   • For DSCP:
     [edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set dscp (classifier-name | default)
   • For DSCPv6:
     [edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set dscp-ipv6 (classifier-name | default)
   • For IEEE 802.1:
     [edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set ieee-802.1 (classifier-name | default) vlan-tag (inner | outer)
   • For inet-precedence:
     [edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set inet-precedence (classifier-name | default)