Technical Documentation
New
Related Documentation
- M Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- MX Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- PTX Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- T Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
managed-configuration (Dynamic Router Advertisement)
Syntax
(managed-configuration | no-managed-configuration);
Hierarchy Level
[edit dynamic-profiles protocols router-advertisement interface interface-name]
Release Information
Statement introduced in Junos OS Release 10.1.
Description
Specify whether to enable the dynamic host to use a stateful autoconfiguration protocol for address autoconfiguration, along with any stateless autoconfiguration already configured:
- managed-configuration—Enable host to use stateful autoconfiguration.
- no-managed-configuration—Disable host from using stateful autoconfiguration.
Default
The configured object is disabled unless explicitly enabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- MX Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- PTX Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
- T Series
- Example: Configuring IPv6 Interfaces and Enabling Neighbor Discovery
Published: 2013-02-11
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
