snmp

Syntax

snmp -T system:mm[x] <-cax community-type> <-cx community-name> <-cxin (ip-address | hostname)> <-cn contact-name> <-l location>

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS1200 platform only) Display or configure SNMP settings on the JCS management module.

Options

-T system:mm[x]—Specify the JCS management module as the target of the command. Replace x with a value of 1 or 2.

-cax community-type—(Optional) Specify an SNMPv3 view type for the community. View types can be get, set, or trap. Replace x with a value of 1 through 3 to represent the community number.

-cx community-name—(Optional) Specify a descriptive name for the community. Replace x with a value of 1 through 3 to represent the community number.

-cxin (ip-address | hostname)—(Optional) Specify an IP address or hostname for the community. Replace x with a value of 1 through 3 to represent the community number. Replace n with a value of 1 through 3 to represent the host ranking (first, second, or third). You can specify up to three hosts for each community.

-cn contact-name—(Optional) Specify a contact name for the SNMP community host server.

-l location—(Optional) Specify a location for the SNMP community host server.

Required Privilege Level

operator (display)

supervisor (display or configure)

List of Sample Output

Output Fields

Table 1 lists the output fields for the snmp command. Output fields are listed in the approximate order in which they appear.

Sample Output

To be provided.

OK