Technical Documentation
Related Documentation
request chassis pic
Syntax
Syntax (TX Matrix and TX Matrix Plus Router)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Control the operation of the PIC.
 | Note: The request chassis pic (offline | online) fpc-slot slot number pic-slot slot-number command is not supported for built-in PICs on MX Series routers. To view a list of built-in PICs on the router or switch chassis, use the show chassis hardware command. |
| Note: T1600 routers and TX Matrix Plus routers with 100-Gigabit Ethernet PICs require two adjacent PIC slots, 0 and 1, for each PIC. Therefore, only online and offline command options to PIC slot 0 are allowed. Use of the online and offline command options for PIC slot 1 with the described router and PIC combination is not allowed. |
| Note: In T Series routers, when the PIC state is set from offline to online or vice-versa before the processing is complete for the previous command, you are provided feedback on the status of your request. The following sample messages are displayed if you try to set a PIC offline or online: user@switch> request chassis pic fpc-slot 1
pic-slot 0 onlinefpc 1 pic 0 online initiated, use "show chassis fpc pic-status" to verify user@switch> request chassis pic fpc-slot 1
pic-slot 0 online FPC 1 PIC 0 already transitioning to online When the same PIC is set to a different state while the transition is in progress, you are provided feedback on the status of your request. user@switch> request chassis pic fpc-slot 1
pic-slot 0 offlineFPC 1, PIC 0 already transitioning to online. Please retry later. |
Options
offline | — | Take the PIC offline. |
online | — | Bring the PIC online. |
fpc-slot slot-number | — | Flexible PIC Concentrator (FPC) slot number. Replace slot-number with a value appropriate for your router or switch:
|
pic-slot slot-number | — | PIC slot number. For the M Series router, the T640 router, the T1600 router, and the TX Matrix and TX Matrix Plus routers, it can be 0, 1, 2, or 3. On the MX960 router, slot-number corresponds to the slot number of the Packet Forwarding Engine. For the T320 router, it can be 0 or 1. For EX3200 and EX4200 switches, it is 0 for built-in network interfaces and 1 for interfaces on uplink modules. For EX8208 and EX8216 switches, it is 0. |
lcc number | — | (TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router, control the PIC in a specified T640 router that is connected to the TX Matrix router. On a TX Matrix Plus router, control the PIC in a specified T1600 router that is connected to the TX Matrix Plus router. Replace number with a value from 0 through 3. |
Required Privilege Level
maintenance
Related Documentation
List of Sample Output
request chassis picOutput Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis pic
user@host> request chassis pic pic-slot
0 online fpc-slot 0FPC 0, PIC 0 is already online
