Take the FPC offline.

Bring the FPC online.

Bring the Flexible Port Concentrator (FPC) on the Interconnect device either offline or online:

• (QFabric Switch) On a QFabric switch, specify the name of the Interconnect device containing the Flexible Port Concentrator (FPC) you want to bring either offline or online.

Restart the FPC.

FPC slot number:

• M20 router—0 through 3.
• M120 router—0 through 5.
• MX240 router—0 through 2. On the MX240 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number corresponds to the MPC slot number.
• MX480 router—0 through 5. On the MX480 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number corresponds to the MPC slot number.
• MX960 router—0 through 11. On the MX960 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number corresponds to the MPC slot number.
• TX Matrix and TX Matrix Plus routers only—On the TX Matrix router, if you specify the number of the T640 router by using the lcc number option (the recommended method), replace slot-number with a value from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31.

  Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 router by using the lcc number option (the recommended method), replace slot-number with a value from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31. For example, the following commands have the same result:

  user@host> request chassis fpc lcc 1 slot 1 offlineuser@host> request chassis fpc slot 9 offline
• Other routers—0 through 7.
• QFabric Switch —Replace slot-number with a value from 0 through 2.
• EX Series switches:
  • EX4200 switches in a Virtual Chassis configuration—Replace slot-number with a value from 0 through 9 (switch’s member ID).
  • EX6210 switches—Replace slot-number with a value from 0 through 3, or 6 through 9 (line card).

    Note: These commands are not supported for slot 4 and 5 in EX6210 switches which are the slots for Switch Fabric and Routing Engine (SRE) modules.

  • EX8208 switches—Replace slot-number with a value from 0 through 7 (line card).
  • EX8216 switches—Replace slot-number with a value from 0 through 15 (line card).

(MX Series routers only) (Optional) Change FPC status of all members of the Virtual Chassis configuration.

(MX Series routers only) (Optional) Change FPC status of the local Virtual Chassis member.

(MX Series routers only) (Optional) Change FPC status of the specified member of the Virtual Chassis configuration. Replace member-id with a value of 0 or 1.

(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router, control the FPC in a specified T640 router that is connected to the TX Matrix router. On a TX Matrix Plus router, control the FPC in a specified T1600 router that is connected to the TX Matrix Plus router. Replace number with a value from 0 through 3.