list

Syntax

list -T target <-l depth>

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS management module CLI) List devices on the JCS1200 platform. This information is useful for determining how many Routing Engines and JCS management modules are installed and which JCS management module is primary.

Options

-T target—Specify a command target. Valid targets for this command include:

• system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
• system:blower[x]—Specify a JCS fan (blower) as the command target.
• system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).
• system:power[x]—Specify a JCS power module as the command target. Replace x with the power module number (1 through 4).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).

If no command target is specified, all devices on the JCS1200 platform are listed.

-l depth—(Optional) List a hierarchy of devices (starting with the device specified as the command target). Replace depth with one of the following values:

• 2 | all | a—List the full hierarchy of devices (starting at the command target level). You can enter a as an abbreviation for all.
• 1—List the command target only.

Required Privilege Level

operator

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

mm[1] primary
mm[2] standby
power[1]
power[2]
power[3]
power[4]
blower[1]
blower[2]
blower[3]
blower[4]
switch[1]
switch[2]
blade[1] bcgcpu1
         sp
         cpu[1]
blade[3] bcgcpu3
         sp
         cpu[1]
blade[4] bcgcpu4
         sp
         cpu[1]
blade[5] bcgcpu5
         sp
         cpu[1]
blade[6] bcgcpu6
         sp
         cpu[1]
mt[1]
mt[2]
tap
mux[1]
mux[2]