baydata

Syntax

baydata <–b n> (-clear | -data “data-definition”)

Release Information

Command supported by Junos OS Release 9.1 and later.

Description

(JCS management module CLI) Display, configure, or remove informational data (blade bay data) associated with Routing Engine blades.

Note: When a blade restarts, the status should change from “BSMP” to “Supported”. The "Supported" status indicates that the blade has been restarted since the last baydata change for that blade, and it should have the proper baydata configuration information. However, if the management module (MM) is reset, all blades will show a "BSMP" status, because the MM does not know if the blades have current baydata information after a restart. As individual blades are restarted, their status should change to "Supported".

Options

-b n—(Optional) Specify a specific Routing Engine. Replace n with the Routing Engine slot number (1 through 12). If a Routing Engine is not specified, the command applies to all Routing Engines in the JCS chassis.

–clear—Remove the blade bay data definition.

-data “data-definition”—Set the blade bay data. Blade bay data is an ASCII text string with the following format: Vn-JCSn-SDn-PSDn-REPn-REBn-PRDplatform-type. Enclose the text string in double quotation marks (” “).

• Vn—Version number of the blade bay data. Replace n with a version number. The accepted value is 01.
• JCSn—JCS identifier. Replace n with the ID number of the JCS. The range of values is 01 through 04.
• SDn—RSD identifier. Replace n with the ID number of the RSD. The range of values is 01 through 03.
• PSDn—PSD identifier. Replace n with the ID number of the PSD. The range is 01 through 31.
• REPn—Slot number of the primary Routing Engine in a primary, backup Routing Engine pair. Replace n with the slot number of the Routing Engine. The range is 01 through 12.
• REBn—Slot number of the backup Routing Engine in a primary, backup Routing Engine pair. Replace n with the slot number of the Routing Engine. The range is 01 through 12.
• PRDplatform-type—Routing platform type. Replace platform-type with one of the following values: T1600, T640, T320, or SCE (standalone control element).

Required Privilege Level

supervisor

List of Sample Output

Output Fields

Table 1 lists the output fields for the baydata command. Output fields are listed in the approximate order in which they appear.

Sample Output

Bay   Status           Definition
1     Unsupported     
2     No blade present
3     Supported         V01–JCS01–SD01–PSD01–REP03–REB04–PRDT640
4     Supported         V01–JCS01–SD01–PSD01–REP03–REB04–PRDT640
5     Supported         V01–JCS01–SD01–PSD01–REP05–REB06–PRDT640
6     Supported         V01–JCS01–SD01–PSD01–REP05–REB06–PRDT640
7     No blade present
8     No blade present
9     No blade present
10    No blade present
11    No blade present
12    No blade present

OK

OK

OK