Skip to content

Solutions

Literature

Application Notes

Find out how to apply Juniper Networks technology and solutions to create cost-efficient, scalable IP infrastructures.

Using Multicast Call Admission Control for IPTV Bandwidth Managementpdf icon294 KB
This application note describes how to manage bandwidth in IPTV networks using the MCAC capabilities of the edge router.

JUNOSe Software Support for DHCP in Service VLANspdf468 KB
This application note provides an overview of extended JUNOSe software feature sets to support Dynamic Host Configuration Protocol (DHCP)-based subscriber management in a service VLAN, improving scalability and availability.

Configuration Options for Hardware Rule Search (RMS) and Software Rule Search (SWRS)pdf119 KB
This document will help customers understand the performance implications of not using Security Zones to partition the rule set when using ASIC-based platforms.

Machine Authentication Using Certificatespdf708 KB

Identity-Based Traffic Logging and Reportingpdf754 KB

Identity-Based Application and Network Profilingpdf958 KB

DX Upgradepdf158 KB
Describes how to upgrade DX devices and important points for success.

DX ActiveNpdf872 KB
Describes how this technology works and how to move from active/passive to ActiveN configuration.

Client IP Transparencypdf280 KB
Describes how this technology works and how to configure it.

Configuration Synchronizationpdf136 KB
Describes how to facilitate easier management with multiple DX appliances.

Microsoft OWA DX Optimizationpdf319 KB
Describes DX integration with Microsoft OWA and best practice configuration techniques.

DX Integration with Sharepointpdf263 KB
Describes how the DX works with Sharepoint.

DX Clusterpdf1.3 MB
Specific Configuration and Troubleshooting - describes how to specifically fine tune the DX in clusters.

DX Evaluation Stepspdf2.4 MB
Describes how to perform DX trials.

WAN Routing Configuration Examples for the Secure Services Gateway Familypdf1.1 MB
Outlines a series of routing deployment scenarios and configuration examples (with and without QoS) starting with a basic T1 connection using OSPF and advancing to more elaborate configurations using MLPPP and MLFR. The Configuration Commands required to implement the deployment scenarios on any one of the SSG Family platforms are included in each scenario.

DHCP Subscriber Managementpdf408 KB
Juniper Networks' DHCP implementation integrates with RADIUS to provide the same subscriber management capabilities as PPPoX-based solutions. This paper describes the primary challenges to using DHCP to offer retail services and describes Juniper’s advanced DHCP subscriber management implementation.

Tuning Citrix for Optimal Performance with the WX/WXC Platformspdf icon394 KB
This application note describes how users can fine-tune Citrix for operation with the Juniper WX and WXC application acceleration platforms.

Building the Next Generation Multi-Service Broadband Networkpdf icon457 KB
This paper provides considerations for service providers making the move to multi-play. These considerations include immediate needs to support broadcast IPTV, while establishing an extensible infrastructure to support additional interactive video services.

VoIP Protection with Juniper Networks IDPpdf icon152 KB
This document describes the latest features of the Juniper Networks IDP products designed to prevent attacks based on different VoIP protocols.

Using MPLS Auto-bandwidth in MPLS Networkspdf icon130 KB
Network operators can take advantage of dynamic traffic-engineering features available in JUNOS as they transition to using off-line TE tools.

Streamlining Enterprise Network Management with the Intuitive J-Web Graphical User Interfacepdf icon213 KB
By utilizing the familiar browser-based interface, J-Web delivers a more user-friendly approach to the management of JUNOS routers.

Deploying Enhanced NAT Services in GPRS Networkspdf icon138 KB
This document provides an overview of how Juniper Networks Netscreen firewall products can be deployed in a typical GPRS Gi network to provide enhanced NAT services.

Integrating WX WAN Optimization with Netscreen Firewall/VPNpdf icon758 KB
Application Note describing interoperability options for the WX and NS platforms.

IGMP Capabilities in Broadband Network Architecturespdf icon1.1 MB
Basic overview of the Internet Group Multicast Protocol (IGMP) and how it can be implemented or processed by various elements in a broadband video architecture.

IP Telephony Solution with Juniper, Avaya and Extremepdf icon1.4 MB
Application Note describing a verified reference architecture for WAN IP telephony with these three vendors.

Next Generation Extended Enterprisepdf icon1.9 MB
IVE, Routing, Firewall, IDP, and Application Acceleration.

Network Based VPN/Firewall Servicespdf icon2.0 MB
This document outlines a typical solution that Juniper can build to offer Network-based IPsec VPN and Firewall services.

Building a Secure Virtualized Enterprise Corepdf icon1.1 MB
Reference Design with IPSec and MPLS.

Perimeter Gateway with Firewall, IDP and NSMpdf icon856 KB
This paper addresses the triage (layered) approach to security in the network perimeter.

Internet Access from Layer 3 VPNspdf icon654 KB
This application note explores key architectures for supporting NAT/VRF interworking solutions.

Calm During the Storm: Best Practices in Multicast Securitypdf icon89 KB
This application note details a set of recommended best practices for securing a multicast infrastructure of Juniper Networks routers.

High Availability at the Central Site Edgepdf icon434 KB
The Central Site Edge, where the enterprise meets the WAN or Internet, contains critical requirements, in terms of both security (from intrusion and denial of service, among other concerns) and high availability. Juniper Networks provides this area with a variety of highavailability solutions.

Operation of Modified Deficit Round Robin in M-series Routerspdf icon45 KB
This paper notes that each queue within Modified Deficit Round Robin (MDRR) is defined by four variables.

Introducing MPLS Layer 3 VPNs in Mobile Operator Networkspdf icon373 KB
This paper discusses one approach that mobile operators can use to gradually introduce MPLS VPNs to provide logical network isolation to various mobile services.

Juniper Networks NetScreen-IDP Protects Against the New Sendmail Vulnerabilitiespdf icon137 KB
How to protect against the Sendmail vulnerabilities with Juniper Networks NetScreen-IDP product line.

Multiservice Networking with the M-seriespdf icon601 KB
This paper provides a basic primer, including configuration snippets, on how to run multiple services such as Layer 3 VPNs, Layer 2 VPNs, VPLS, VPN-aware NAT and stateful firewall as well as other services on a single M-series platform.

Understanding and Implementing Multicast Servicespdf icon654 KB
Learn how IP multicast can deliver data from a source to some subset of all reachable hosts in a network.

JUNOS Router Securitypdf icon197 KB
Identify common security issues concerning router configuration and operation, learn about Juniper Networks features that can be useful in preventing and combating attacks, and note best common practice guidelines for the secure deployment of Juniper Networks routers.