Hardware Specifications
- Hard Drives: 2 x 500 GB
RAID 1 - Memory: 8 GB
- Maximum Events per Second: 500
- Maximum Flows per Minute: 15, 000
Dimensions and Power
- Dimensions (W x H x D):17.72 x 3.5 in x 17.26(45 x 8.8 x 43.84 cm)
- Weight: 26 lb 2 oz
- Rack Mountable: 2U
- Power supply (AC): 90 V to 264 V hot swap dual redundant 400 watt AC power module
- Power supply (DC): 90 V to 264 V hot swap dual redundant 710 watt DC power module with optional 48 V DC power supply
- Simultaneous AC and DC Modules Support: Yes
- Chassis Material: 18 gauge cold rolled steel
- Fans: 2 x 80 mm hot swap redundant fans (2nd optional)
- Traffic Ports: 2x RJ45 10/100/1000
- Console Port: 1x RJ45 serial console
Environment
- Operating Temperature: 41° to 104° F (5° to 40° C)
- Storage Temperature: -40° to 158° F (-40° to 70° C)
- Relative Humidity (Operating): 8 to 90 percent noncondensing
- Relative Humidity (Storage): 5 to 95 percent noncondensing
- Altitude (Operating): 10,000 ft maximum
- Altitude (Storage): 40,000 ft maximum
STRM Series Security Threat Response Managers
다운로드
[ 
884 KB (한글) ]
884 KB (한글) ]
Download
| SKUs | Description |
|---|---|
| STRM500-A-BSE* | STRM 500 Base Appliance; Devices=250 |
| STRM500-ADD-250E-7500F | EPS=250, Flows/min=7.5K Qflows/SFlows (15K J/NetFlows); |
| Log Management | STRM 500 Log Management |
| STRM500-LM-ADD-250E | Log Management EPS=250 |
| Upgrade to Full STRM | STRM 500 Upgrade to Full STRM |
| STRM500-LM-250E-TM | Upgrade STRM Log Management to Full STRM Threat Management. EPS =250, Flows/min=7.5K Qflows/SFlows (15K J/NetFlows); |
| QFlow Collector | Requires STRM 500 |
| STRM500-QFC-ADD-50M | Add up to 50Mbps QFlow Collector for monitoring (Add 4 times to get full capacity) |
| UNIV-1GE-4ETH | 4 Port Ethernet Card for Juniper STRM Q-Flow Collector |
| Devices | Supports STRM 500, 2500 & 5000 |
| STRM-ADD-DEV-50 | Add additional device support in either Log Management or Threat Management solution in increments of 50 Devices |
