LN Series

Edge access routers designed to provide firewall and intrusion detection service (IDS).

LN Series

Need Help?

Products
Features and Benefits
Literature

LN1000

The LN1000 is a secure, high-performance edge access router in a small form factor energy-efficient package. Designed for the portable and transportable router markets, it’s ideally suited to the most demanding mobile network applications.

Learn more

Feature	Benefit
VPX 3 U form factor VITA 46 Interface 4 x 6.3 in (100 x 160 mm) height and length -40° F to 185° F (-40° C to 85° C) operating temperature	Small, single board size makes the LN1000 easily configurable in the customer chassis using an industry-standard VITA 46 backplane.
Low power requirement	Running with full functionality at less than 35 W, the LN1000-V is easily embedded in a moving vehicle, whether terrestrial, airborne, or at sea, where power is often limited.
SWAP qualities	The exceptional Space, Weight, and Power (SWAP) characteristics (< 1.5 lb, < 35 W, 3 RU x 6.3 in deep) make the LN1000-V a unique product for vehicular, airborne, or seaborne units where size, weight, and power must be kept to a minimum. The clear advantage for the LN1000-V is to be able to deliver full routing functionality, 8 x 1GbE outputs, as well as firewall and IPS security functions in a small package designed to be easily embedded in a customer chassis that conforms to the VITA 46 standard.
IPMI	The LN1000-V is designed with an Intelligent Platform Management Interface for external commands such as reset, remote power on and off, onboard temperature and voltage sensing, and status information. IPMI provides an external control capability for a router that is typically embedded in a constrained space.
RS232 console port	One RS232 console at the front end of the card via RJ45 connector and also mirrored to the backplane. The RS232 console port can be used to externally monitor operational status as well as to run the Junos OS CLI while the router is in operation.
IPv4 and IPv6 support	Includes support for forwarding of IPv4/IPv6 packets, IPv4/IPv6 firewall, and intrusion prevention system (IPS) to ensure scalability on the world’s largest networks.
Junos OS functionality	The LN1000 supports the rich routing and networking functionality of the Junos OS, enabling it to be easily configured to WAN and LAN routers all running the same OS.
Protocol (4938bis)	Allows the LN1000-V to communicate to a radio card for uplink using a PPPoE extension (RFC 4938bis). Support for the protocol enables the LN1000 to monitor available bandwidth on a per-hop basis, and adjust routing tables and message queues to ensure that traffic is transported effectively and efficiently.
QoS	The LN1000-V will support 8 queues per virtual, logical, or physical interface. Each queue can have four random early detection (RED) classes applied to it. The hardware-based QoS capability ensures consistent routing performance across all 8 x 1 Gbps Ethernet ports whether QoS is enabled or not.
Hot swap	Supports VITA 46.13 Hot Remove/Insert Specification. The LN1000-V can be removed from or inserted into the backplane while power is applied without damage to either the backplane or to the LN1000.
Performance	500,000 packets/sec at 64 byte packet size without services enabled 200,000 packets/sec at 64 byte packet size with all services enabled (multicast, QoS, firewall, IDS)